Desiccant MolSieve Rotor

The PPM Molecular Sieve rotor is designed for use in dehumidifiers and will perform well when the entering air is dry and/or hot or when the environment is alkaline.

The PPM Molecular Sieve rotor is also suitable when the application calls for a low dewpoint.

To protect the integrity of our customers ProFlute holds patents on the unique manufacturing process of the PPM rotor. The process makes it possible to closely tailor the amount and carateristics of the Molecular Sieve in the rotor.

ProFlute will assist in calculating the capacity, pressure drop and other properties of the PPM rotor.

PPM Desiccant Rotor Properties

Material Composition: The PPM rotor has a very high, 37%, Molecular Sieve content a 45% Silica Gel content and only 16% glass fi bre content. The remaining 2 % is the Acrylic surface coating.

Technical properties: There is no limit for how high relative humidity the rotor can stand as long as droplets are not introduced into the rotor during operation. The PPM rotor can be washed in water with weak alkaline detergent, after saturation in humid air.

Physical properties: The density of dry material is approx. 250 kg/m3. The PPM media is designed to have its maximum capacity at low moisture content in the air or when the entering air is hot. The surface compression strength of the rotor is more than 200 kPa.

Physical Size:

Diameter [mm] Available depth [mm] Shaft diameter [mm] Delivered knock-down for assembley on site [mm]

100-300 50, 100, 200 20 No

450-550 100, 200, 499 20 No

600-1050 200, 400 20 No

1150-1950 200, 400 30 Can

2000-3000 200, 400 40 Yes


	Desiccant MolSieve Rotor (PDF: 99kb)

Proflute AB, Enhagsslingan 6, SE-187 32 Täby, Sweden, Tel: +46 (0) 8 511 87 800, Fax: +46 (0) 8 511 87 700, info@proflute.se
Triggerweb CMS is a content management system from Triggerfish bureau Stockholm - Mobile webpage